Inhoudsopgave
Advertenties
♦ This appliance is equipped with a cartridge disconnection device in case of overpressure: if the gas pressure in the
cartridge exceeds the security level, the device disconnects the cartridge and its connecting lever returns to position
"UNLOCK". In this case, remove the cartridge and let it cool (for example under water) before using it again or using a
new cartridge by following instructions mentioned on "Replacing the cartridge" section.
♦ DO NOT force restarting without cooling or replacing the cartridge.
♦ Use exclusively KEMPER butane cartridges art. 577 / Decathlon 4050185. It may be dangerous to adapt other gas
containers.
♦ All operations of assembly and change of cartridges must be done in a well-ventilated place and far from flames and
inflammable materials.
♦ Read carefully the instructions on the wrapping of the cartridge before using
♦ Never try to refill a disposable cartridge.
♦ Always keep the appliance away from children
♦ Never breathe in the gas coming from the cartridge or the smoke produced while using the appliance.
♦ Never smoke while handling cartridges.
♦ When the appliance is not used, the cartridge must be disengaged by positioning the cartridge connection lever D on
"RELEASE".
IN CASE OF LEAKAGE (SMELL OF GAS) BRING YOUR APPLIANCE IMMEDIATELY OUTDOORS, IN A
VENTILATED PLACE WITH NO INFLAMABLE SOURCES, AND THEN YOU CAN LOOK FOR LEAK AND STOP
IT. IF YOU WANT TO CHECK THE Seal OF YOUR APPLIANCE, DO IT OUTDOORS AND NEVER LOOK FOR A
LEAKAGE WITH A FLAME BUT USE SOAPSUDS.
BEFORE USING CHECK THAT THERE ARE NO LEAKS.Check the leakage of your device only outside. Do not seek
the leakage with a match but use water and soap or a gas detector (our article Revelgas cod. 1726). Apply solution of soap
and water or gas detector in the interspaces of the unit. If bubbles appear, it means that there is a leak and it must be repaired
before use. If you detect a leak and you cannot repair it, don't try to fix it another way, but contact the customer service.
Do not use a device that leakage, deteriorated or malfunctioning.
Starting the appliance
Put the hot plate on a stable and horizontal surface. Do not alongside two or more burners.
Put the hot plate far from inflammables substances or things that can be damaged by heat.
Turn up side down the potholder plate paying attention that the 90° angles are turned towards the cartridge holder slot.
Put the cartridge in its slot, placing the cut on its neck in correspondence to the safety stop.
Make sure that the hot plate cock is closed - Cock on position "OFF"
(clockwise rotation).
Place the lever connecting the cartridge on the "LOCK" position.
ATTENTION: the appliance is now ready for use. The positioning of the lever
on "LOCK" presupposes the immediate ignition of the stove as the gas circuit
is ready for gas supply. Do not leave the appliance unattended and without
flame with the lever positioned on "LOCK".
Turn anticlockwise all the way the cock until it is positioned on "ON" where
the piezo ignition will ignite the flame.
Regulate the flame according to your needs.
Warning: the device is not equipped with a safety system for the automatic closing gas (thermocouple).
Shutting down the appliance
To turn off the fire rotate clockwise the cock to the "OFF" position.
Position the cartridge-connecting lever on the "RELEASE" position.
Wait for the plate to cool before storing it.
In case of long periods of no use of the product, it is compulsory to take the cartridge out of the appliance.
This unit can be kept inside only if the cartridge has been disconnected and removed from the appliance. If you expect
that the barbeque remains unused for a certain period of time, store it in its original packaging and in an environment
free from dust.
Information on the use of cartridges
LEAKAGE TEST
USE INSTRUCTIONS
DT Istr 104987_10/2007_Rev.10_09/2019
11/60
Advertenties
Inhoudsopgave
