4. CONTROLS
Key Key press
A
Short
B
Short
Long press with
light or motor on
Short
C
Long
D
Short
Long
E
Short
Long
Recommended device coupling sequence:
1 - K-Link Mode (See remote control manual)
2 - K-Link Coupling (See hood manual)
3 - Remote Control-Hood Coupling (See remote control manual)
4 - K-Link Coupling (See hood manual)
5 - Cooktop-Hood Coupling (See induction cooktop manual)
5. LIGHTING
• Please contact the Service Depart-
ment to change it ("Please contact
the service department to purchase
it").
6
A
B
Functions
Turns the motor on/off at the first speed.
Turns the lights on/off at maximum intensity.
K-Link coupling
Before starting the procedure follow the specific instructions of the manu-
als of the devices to be coupled.
Starts the pairing procedure between the hood and compatible K-Link
devices (induction cooktop or remote control). Up to 3 induction cooktops
can be paired and only one remote control. See the manual of the devices
for details of the operations that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the procedure for
the devices to be coupled. The maximum number of linkable devices may
have been reached.
With motor on:
switch on the Anti-condensation system.
It is deactivated by pressing the same key or by switching off the motor.
Warning! The glass and hood can become hot while the anti-condensation
is in use.
K-Link uncoupling
Starts the procedure for the cancellation of all compatible K-Link devices
previously coupled with the K-Link coupling function.
Turns the motor on at the second speed.
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the Coupled Induc-
tion Cooktop is turned on. The hood speed is automatically set using the
highest power level present on the hob. When the induction cooktop is
turned off the last activated speed is held for 5 seconds, then speed 1 for
15 minutes. Once the 15 minutes have passed the motor turns off. The
light status does not change.
Turns the motor on at the third speed.
Long press:
turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system auto-
matically returns to the previously selected speed.
It is deactivated by pressing the same key or by switching off the motor.
C
D
E
LED
Fixed
Fixed
LED D and E flash-
ing:
coupling in progress.
Upon
successful
completion of the
procedure, LEDs D
and E are switched
on for 2 seconds.
Fixed
Upon
successful
completion of the
procedure, LEDs D
and E flash 5 times.
A and D Fixed
A and LED set speed
fixed
A and E fixed
A fixed and E flash-
ing