Installation of the lift up handles
• First, let the smooth side of the handles point up-
wards and align with the 3 screw holes.
Note: A Phillips screw driver is required.
Operation
Functions of main parts
Part
Heating indicator (2)
Keep Warm indicator (3)
Filling the appliance
• Make sure the drain tap (4) is closed.
• Do not fill the appliance beyond the MAX marking
on the inner wall of the container. It is recom-
mended not to operate the appliance if the liquid
level is too low.
Switch ON/OFF the appliance
• Plug into a suitable electrical outlet.
• Switch ON the appliance by pressing the ON /
OFF switch (1) to the "I" position.
Function
ON/OFF switch
- Switch the appliance ON (I) or OFF (0).
Temperature dial
- Switch the heating function on or off and set the temperature from approx. 30°C ~
110°C.
Heating indicator
- Light up in orange to show the heating function is activated.
Keep Warm indicator
- Light up in green to show that the liquid is under keeping warm at a stable temper-
ature.
• Next, screw up tightly with the handles from the
inside of the container (7).
• IMPORTANT: After installation, make sure the lift
up handles is assembled firmly in order to avoid
accident.
• Do not store the liquid for long period of time.
• The liquid will be heated to the set temperature.
• When the set temperature has been reached, the
Keep Warm indicator (3) will light up in green.
The liquid will be kept at a stable temperature.
• Then, set the temperature by turning the "Tem-
perature dial" [Range: 30°C ~ 110°C].
• HEATING indicator (2) will light on in orange.
EN
7