Folding Table
Introduction
This quick reference guide is a
fixed part of the operating instruc-
tions. Keep both this and the op-
erating instructions in a safe place. When
passing this product on to third parties,
please be sure to include all documenta-
tion. Read the operating instructions before
use, and pay particular attention to the
safety instructions included in the operat-
ing instructions.
Scan the QR code, or download the complete
operating instructions at www.lidl-service.com.
Intended use
This product is suitable for personal use and has a
maximum weight capacity of 50kg of the fixed table
top and 8kg of the foldable table area. This product
is intended for use indoor. The product is not in-
tended for commercial use.
Safety advice
PLEASE KEEP ALL SAFETY INSTRUCTIONS
AND INSTRUCTIONS FOR USE FOR FUTURE
REFERENCE!
DANGER TO LIFE! Never
leave children unattended with the packaging
material or the product. Suffocation hazard!
The product could become unstable and fall
sideways or tip. This could result in injuries or
property damage.
Do not use the product near open fire.
Be careful when unpacking the product.
CAUTION! RISK OF INJURY! Ensure all
parts are undamaged and correctly assembled.
Incorrect assembly poses the risk of injury.
Damaged parts may affect safety and function.
Only use the equipment for the stated use.
Verify the product is stable before use.
Be sure to set the product on a level and firm
surface.
Do not use this product as a standing surface,
stepladder or for bouncing on.
Please note the maximum weight capacity of
50kg of the fixed table top and 8kg of the fold-
able table area. Exceeding this weight limit
may result in injuries and/or property damage.
Check the product for damage or wear before
every use. Only use the product in good condi-
tion. Do not use the product if damage is visible
or suspected.
RISK OF PROPERTY DAMAGE! We are
not liable for accidents resulting from failure to
comply with the above safety instructions or
improper handling.
Regularly check all fastenings to ensure that
they properly tightened.
Cleaning and Care
Clean the product and remove stains with a
damp cloth and a mild cleaner specifically
designated for this product.
Use a soft sponge and clean water to clean
dirt off this product.
Allow all parts to dry well before packing up
the product. This will prevent mould, odour and
discolouration.
GB/IE
7