Inhoudsopgave
Advertenties
EN
OPERATION INSTRUCTIONS
The following switches are located at the back of the heater.
1. Insert plug into mains socket
2. Open the front door.
3. Select the desired functions:
-
Flame/fuel effect on/off (3)
-
Low heat setting 900W (3 + 4)
-
High heat setting 1800W (3 + 4+ 5)
-
Heating and Flame effect (1 + 2 + 3 + 4 + 5)
Increase or decrease flame intensity by clockwise or anti-clockwise
rotates the flame dimmer knob (2).
Rotate thermostat knob clockwise or anti-clockwise to increase or
decrease desired room temperature setting.
Notice: The heater will only work if switch O/I is on and thermostat is
set above current room temperature.
SAFETY CUT-OFF
This appliance is fitted with a safety cut-off which will operate if the
heater overheats (e.g. Due to blocked air vents). For safety reasons, the
heater will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply
for at least 15 minutes. Reconnect the supply to the mains and switch
on the appliance.
Electric Stove - English manual
6
Advertenties
Inhoudsopgave
