Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PLACEMENT
This heater is designed to be placed on a hard, level surface. When
positioning, please keep the following points in mind:
If you are placing the heater in an alcove, make sure that there is at
least 150mm of space on all sides to ensure good air circulation
The heater must not be located over a fixed electrical socket. The
socket must always be accessible in order to disconnect the heater from
the electrical supply for maintenance or when replacing a lamp.
Keep hearth rugs and other soft furnishings away from the front of the
heater. They could obstruct the free flow of hot air from the fan and
damage both soft furnishings and heater.
LOCATION OF CONTROLS
The following switches are located under the front door of heater.
1
1. Thermostat knob
2. Flame dimmer knob
3. Flame switch
4. Heater switch
5. Heater switch
Electric Stove - English manual
3
4
- Adjust to maintain room temperature
- Adjust to set flame intensity
- Turn on/off for flame/fuel effect
- Turn on/off for one of 900W heat setting
- Turn on/off for one of 900W heat setting
5
2
EN
5
Advertenties
Inhoudsopgave
