hajdu HB300 Handleiding Voor Installatie, Gebruik En Onderhoud pagina 64
Warmtepompboiler
Verberg thumbnails
Zie ook voor HB300:
- Handleiding voor installatie, gebruik en onderhoud (344 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
_________________________________ ___EN__________________________________22
Control panel explanation
6.1.
Display explanation
6.2.
HIGH TEMP indicator: When the setting temperature exceeds 50 C, it lights up to
1
remind you that the outlet temperature is too high for direct spray.
2
FILL WATER indicator: When the power supply is turned on, it lights up to remind you to
re-affuse water.
3
ALARM indicator: it flashes continuously at malfunctioning or protection time. .
4
TEMP-SET indicator: it shows the setting temperature at blank during screen protection.
Codes are shown at malfunctioning or protection time.
5
LOCK indicator: when the user interface is locked, it always lights.
Water temp. indicator: when the actual water temperature exceeds 60 C, it lights up.
6
Water temp. indicator: when the actual water temperature exceeds 50 C, it lights up.
7
Water temp. indicator: when the actual water temperature exceeds 40 C, it lights up.
8
9
OUTLET TEMP indicator: it displays water temperature of the upper part of the tank,
which can be used. It always lights.
10
TIMER CONFLICT indicator: When the temperature you set through Wired Controller
conflicts with that through User Interface, it lights up.
11
TIME OFF indicator: It will light up when timing off mode is set, blanks during screen
protection.
12
TIME ON indicator: It will light up when timing on mode is set, blanks during screen
protection.
13
CLOCK indicator: It displays present time, it blanks during screen protection.
14
E_HEATER MODE indicator: When the user sets the E-heating Mode, it lights up.
15
HYBRID MODE indicator: When the user sets the Hybrid Mode, it lights up.
1
16
15
14
12
13
Display
2
3
4
9
10
11
Operation
5
6
7
8
Advertenties
