Advertenties
Proper use
This high pressure cleaner is designed for domestic use
only.
–
for cleaning machines, vehicles, buildings, tools,
facades, terraces, gardening tools, etc. by means
of a high-pressure water jet (if necessary, with ad-
ditional cleaning agents).
–
with accessories, replacement parts and cleaning
agents approved by KÄRCHER. Please observe
the information accompanying the cleaning agents.
Description of the Appliance
Illustrations on Page 2
1
High pressure connection
2
Detergent suction hose (with sieve)
3
Appliance switch "0/OFF"/ „I/ON"
4
Storage hook for high pressure hose and mains
connection cable
5
Carrying handle
6
Transport handle lock
7
Transport handle, retractable
8
Storage for spray lance
9
Storage for trigger gun
10 Mains cable with mains plug
11 Water connection with integrated sieve
12 Bearing wheel
13 Coupling element for water connection
14 Trigger gun
15 Lock trigger gun
16 Clamp for high pressure hose
17 High pressure hose
18 Spray lance with Dirtblaster
For strong contaminations
19 Spray lance with pressure regulation (Vario Power)
Carrying out the most common cleaning tasks. The
work pressure can be stagelessly regulated be-
tween "Min" and "Max". You can add detergent
when "Mix" is selected.
In order to adjust the working pressure, release the
lever of the trigger gun and turn the spray lance to
the desired position.
20 Washing brush
Suitable for use with detergents.
** not included in the scope of delivery
21 Water supply hose
Special accessories
Special accessories expand the possibilities of using
your appliance. Please contact your KÄRCHER dealer
for further information.
Mount loose parts delivered with appliance prior to start-
up.
Illustrations on Page 2
Illustration
Insert the transport wheels and lock them.
Screw the coupling element to the water connec-
tion on the appliance.
Illustration
Pull out the clamp for the high pressure hose from
the hand spray gun.
Illustration
Connect high pressure hose to trigger gun.
Push the clamp in until it locks. Check the secure
connection by pulling on the high-pressure hose.
Park the appliance on an even surface.
Connect the high pressure hose to the high pres-
sure connection of the appliance.
Water supply from mains
For connection values, see type plate/technical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the KÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Attach the water supply hose to the coupling on the
water connection.
Connect the water supply hose to the water supply.
Completely open the water tap.
– 4
EN
Assembly
Start up
9
Advertenties
Hoofdstukken
