Inhoudsopgave
Advertenties
•
Never immerse the device in water.
•
Protect the device and cables against heat and moisture.
•
Do not expose the device to rain.
•
Make sure that the mounting surface is capable of supporting the weight of the device.
•
Lay the cables so that they cannot be tripped over or damaged.
•
Use ductwork or cable ducts if it is necessary to lay cables through metal panels or other
panels with sharp edges.
4
Intended use
The 12 DC link manager provides optimal management of heavy duty loads. The device provides risk-free opera-
tion of such appliances as an air conditioner, hair dryer and coffee machine, on or off grid. The device is intended
to be used with 12 V charging systems and appliances. The device protects the batteries and the electrical sys-
tem by selecting the safest power source. The device always keeps the starting and the house battery voltage un-
der control, avoiding any overload to the alternator or the electrical system. The maximum constant power con-
sumption of a connected appliance must be below 1500 W. The device is intended to be used in motorhomes,
campervans and coaches.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
•
Incorrect installation, assembly or connection, including excess voltage
•
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
5
Target group
The electrical power supply must be connected by a qualified electrician who has demonstrated
skill and knowledge related to the construction and operation of electrical equipment and instal-
lations, and who is familiar with the applicable regulations of the country in which the equipment
is to be installed and/or used, and has received safety training to identify and avoid the hazards in-
volved.
6
Installation
1.
Remove the two screws.
2. Remove the lid.
Fig.
on page 3
3. Secure the device on the mounting surface using the included screws.
Fig.
on page 4
8
Advertenties
Inhoudsopgave
