Inhoudsopgave
Advertenties
USER MANUAL
AeroFlow® Surface storage heater with FlexiSmart thermostat
German battery legislation
Since batteries and rechargeable batteries may be included in our
consignments, we are obliged by the German battery legislation (BattG)
to point out the following: Batteries and rechargeable batteries must
not be disposed of with household waste, but you are legally obliged
to return used batteries and rechargeable batteries. Used batteries may
contain harmful substances which, if not properly stored or disposed
of, could damage the environment or your health. But batteries also
contain important raw materials such as iron, zinc, manganese or nickel
and can be recycled. You can either return the batteries to us after use or
return them free of charge in the immediate vicinity (eg in stores or in
municipal collection points). The discharge in points of sale is limited
to end user customary amounts and such batteries that are sold or have
been sold from the distributor as new batteries in his assortment.
The battery can only be replaced by trained personnel or by the company
Thermotec AG.
Note - alignment of the temperature sensor
The temperature sensor is attached to the bottom of the radiator in
a clip. If, due to the placement of the device in a niche or corner, the
room temperature and the measured temperature is influenced, the
sensor can be removed from the clip. The distance to the radiator can be
increased by turning the connection cable of the sensor. The best way to
correct the temperature is in the menu settings, „temperature correction".
Smart Start (adaptive start control)
With this function, the desired room temperature is met at the start time
of the program. This means that the heater is already heating before
the set start time. This is not a malfunction! Smart Start can only be
used in program mode. You can deactivate Smart Start in the menu item
„Programs". When Smart Start is deactivated, the electric radiator starts
heating when the preset start time is reached.
Learning phase: In order to reach the target temperature exactly at the
start time of each programmed time frame, your FlexiSmart performs
a learning phase in the first seven days. During this time, heating is
always started 15 minutes before the set start time (in every single
time window). As a result, the FlexiSmart controller learns how fast or
slow heating takes place in the room and adjusts the „smart start time"
of heating. After the learning phase, the FlexiSmart controller decides
when to start heating up. Your rooms will be heated up as effectively
as possible.
Switch daylight saving time to standard time
The FlexiSmart controller does not have an automatic changeover
between daylight saving time to standard time. You must change the
time manually in the „Set the time" menu. Exception: If the FlexiSmart
controller is connected to an internet module, an automatic changeover
takes place between daylight saving time to standard time.
EU Declaration of Conformity
Here you can find the EU Declaration of Conformity:
11
www.thermotec.ag
Advertenties
Inhoudsopgave
