Inhoudsopgave
Advertenties
6. Perform LEAK CHECK PROCEDURE (See Page 4).
7. To check that the fuel canister is not empty, liquid fuel may be
heard and/or felt inside when the canister is shaken.
8. Connect fuel canister (3.1) to valve (3.2) by threading in the
orientation shown in Fig 4.
Hand tighten only, do not over-tighten or cross-
thread. May damage seals resulting in fuel leak.
9. Unfold stabilizer legs (1.5) and securely attach stabilizer to
fuel canister (Figs 5-6).
10. Place assembled stove on a flat, level surface, at least 1m/3.3ft
away from any combustible materials or ignition sources.
OPERATING INSTRUCTIONS
• Keep burner at arm's length, away from face, during
ignition. Flame can flare during ignition.
• Do not attempt to light with cookware on the burner. Gas
build-up can occur, resulting in increased flame eruption.
• Never expose stove to flammable vapors or liquids while
lighting the burner. It can cause an explosion or fire.
• Do not move, lift, or tilt stove with lit burner. Product
damage or injury can occur due to flaring.
• Always check that the burner is extinguished before
disconnecting the fuel canister.
7
WARNING
Advertenties
Hoofdstukken
Inhoudsopgave
