Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8. Vacuum cleaning
mode
The user manual contains in-depth informa-
tion on how to use the appliance:
NOTICE!
Risk of damage to property!
Loose cabling can get caught around your ro-
bot vacuum and mop during vacuum clean-
ing and be pulled along by the appliance.
This can result in devices being pulled off a
table and consequently damaged.
Lay cables out of the reach of the appli-
ance.
Remove all fragile items (e.g. glass, lamps,
vases) and objects that could become
trapped in the brushes or sucked up (e.g.
cords, clothing, newspapers, curtains)
from the working area before operating
the appliance.
Remove the robot's brushes before using it
on carpets. This robot vacuum and mop is
not suitable for use on deep-pile carpets.
Make sure that the dust container is clean
and empty and that the filter is inserted
correctly.
Press the
button on the appliance for
approx. 5 seconds or the
the remote control to switch on the robot
vacuum and mop.
Press the
button to start the cleaning
process.
Press the
button again to pause the
cleaning process.
Press the
button again to continue
cleaning.
Press the
button for approx. 5 seconds
or the
button on the remote control to
switch off the robot vacuum and mop.
9. Mopping mode
NOTICE!
Possible material damage!
Floor coverings may be damaged by leaking
water/liquids.
Only use the robot vacuum and mop in
mopping mode on tiles and sealed floor
surfaces, not on carpets.
NOTICE!
Possibility of damage to the appliance!
Unsuitable additives in the water can cause
damage to the appliance.
You can add a commercially available,
non-foaming floor cleaning agent to the
water. Follow the detergent manufactur-
er's dosing instructions.
9.1. Preparing the water
Fig. 13 – Removing the dust container/water
button on
Remove the dust container/water tank.
tank
tank
Fig. 14 – Filling the water tank
DE
FR
NL
ES
IT
EN
105
Advertenties
Hoofdstukken
Inhoudsopgave
