The robot vacuum and mop has a voice out-
put. Status and error messages are indicated
by voice output. These voice outputs are not
mentioned separately in the user manual as
they are self-explanatory.
Press the
button to mute voice out-
put and acoustic signals.
6. Preparing the robot
vacuum and mop
Fig. 8 – Removing the transport lock
Remove all packaging materials, film, and
the transport lock from the appliance.
Fig. 9 – Attaching the side brush
Turn the robot vacuum and mop over
and place it on a soft surface.
Place the side brush supplied vertically
on the drive shaft and press it on until
you hear it click into place.
6.1. Sett ing up the charging
station
Fig. 10 – Setting up the charging station
Plug the charging cable into the connec-
tion socket on the charging station.
Position the charging station on a wall
with a level surface and avoid direct sun-
light.
Ensure that the required clearance of
approx. 0.5 m to the sides and approx. 1.5
m to the front is maintained and that the
charging contacts for the robot vacuum
and mop are freely accessible.
Insert the mains plug into the mains
socket.
6.2. Charging the batt ery
pack
Fig. 11 – Charging battery pack
The robot vacuum and mop is fitted with a
lithium-ion battery pack. Fully charge the ap-
pliance's battery pack for approx. 5–6 hours.
Place the robot vacuum and mop on the
charging station so that the charging
contacts are on top of each other.
DE
FR
NL
ES
IT
EN
103