Inhoudsopgave
Advertenties
EN
D. Connect SM11HW detector to your mobile phone
Step 1: A 2.4 GHz WiFi network is required to connect. If your
network broadcasts on both 2.4 and 5 GHz, disable 5 GHz during
the pairing process (as per your router manual).
Step 2: Install the Tuya Smart- or Smart Life-app on your
smartphone by scanning the QR-code on the right.
05
Figure 2: Turn on Bluetooth in app
Figure 1: Add Device in app
Step 3: Enable Bluetooth via settings on your phone. The
app also needs permission to use Bluetooth.
Step 4: Activate pairing mode by pressing the test button
3 times within 1 second of the interlinked WiFi detector
(SM11HW with the WiFi-logo on the back). If this is done
correctly, the red LED light will flash rapidly. After a few
seconds this will change to a green LED that flashes
rapidly for 1 minute. Within this minute you can link the
detector to your app.
Step 5: Click on the "+" in the top right corner of the app
home screen. Then choose "Add device", as you see in
Figure 1. The app will now automatically look for devices
that are in pairing mode. Follow the steps as described in
the app.
If the app itself does not yet have permission to use
Bluetooth, click on the notification and follow the steps to
allow the app to access Bluetooth as you see in Figure 2.
Frequently Asked Questions
Alarm: If an alarm sounds when you try to activate
pairing mode, a test is activated because you did not
press fast enough. After the alarm stops, try pressing
the test button again 3 times as quickly as possible
within 1 second.
Low battery: The first time the detector is connected,
the app may incorrectly report that the battery is
almost empty. Disconnect the smoke detector and
then reconnect it. If the notification is given again by
the app, please contact us.
Advertenties
Inhoudsopgave
