OPERATION - General information
The below description goes with the image on page 2.
The grill is only intended for domestic use, not for professional use.
1. Handle
2. Grill plate
3. Socket
4. Thermostat dial
5. Indicator light, temperature
OPERATION - Before first use
1. Remove the grill from the packaging, and remove all packaging materials.
2. Clean the grill plate before using the appliance for the first time (see 'Cleaning and maintenance').
WARNING:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use; fumes released from the non-stick coating
when the grill plate is hot can cause stress to birds.
•
Do not touch the appliance if it falls into water. Remove the plug from the wall socket immediately. Do
not use the device again.
OPERATION - Preheating
1. Put the appliance on a level and heat-resistant surface.
2. Insert the thermostat completely into the connection socket of the grill plate. Only the supplied cord with
thermostat may be used.
3. Put the plug in the wall socket.
4. Adjust the thermostat dial to the required temperature (position 1 through 5). The indicator light on the
thermostat will illuminate to show that the heating element has been switched on.
Position Temperature (°C)
1
approx. 160°C
2
approx. 180°C
3
approx. 200°C
4
approx. 220°C
5
approx. 240°C
5. After waiting a few minutes check whether the indicator light is extinguished. Once the indicator light
has extinguished the appliance has reached the required temperature, and is ready for use.
WARNING:
•
Only the supplied cable with thermostat may be used.
•
During use the heating element will switch on and off to keep the temperature of the grill plate constant.
Consequently the indicator light will also occasionally be illuminated.
6. Removable thermostat
7. Power cord with plug
8. Non-slip feet
21
21
EN
EN