Inhoudsopgave
Advertenties
Explanations of symbols used:
See instructions for use
Explosion risk
Fire risk
Burning hot surface
To maintain the device in good condition, it is absolutely necessary to take note of the information plates and
markings on the device, as well as safety recommendations related to use of the device (installation, starting
up, control, maintenance, switching off) and the contents of this instruction manual, otherwise people could
be placed in danger and the device itself could be damaged, as well as other installations. If the device is
used in other countries, the relevant national regulations must be taken into consideration. In addition to the
instructions contained in this manual, generally applicable measures related to accidents and safety must
also be taken into consideration. If the information in these safety instructions is insufficient, contact the
manufacturer at the address provided below.
Inspect the packaging and file a claim with the carrier if there is any damage. Before starting it up, check
that there is no damage to the device. In the event of any doubt, consult a qualified electrician or contact the
company GUILBERT EXPRESS.
If there is any reason to assume that it is no longer possible to start up the device in complete safety, it
must be switched off and placed out of reach, in order to avoid any unintentional starting up.
It can be assumed that it is no longer possible to start up the device safely in the following cases:
• there is visible damage to the device or the power cable;
• the device no longer works;
• the device has been stored in inappropriate conditions;
• the device has been seriously damaged during transport.
PRECAUTIONS
110
The electrical power source must be suitable for the hot air type.
230
To ensure the safety of work carried out on the site, installing a differential circuit breaker and a
FI
residual current breaker is highly recommend.
Use of the electric welding hot air tool must be supervised and the electric welding hot air tool
must be kept away from inflammable products. When the device is not being used, store it in a
secure place, out of the reach of children.
Keep the device in a dry place, in order to prevent it becoming wet or damp.
10
Electrical risk
Risk of death if the device is opened; live components and
connections
Plug the device into a socket equipped with a pro-
tection fuse. Only use cables equipped with a ground
conductor
Advertenties
Inhoudsopgave
