Inhoudsopgave
Advertenties
Insert the plug into the socket. Check beforehand whether this socket meets the
requirements indicated on the party-tent heater's specification plate, i.e. 230V /
50Hz.
By pushing the left switch to I (ON), the smaller, lower
lamp will go on and the corresponding indicator light will
come on. The party-tent heater will emit 600W of heat.
By pushing the right switch to I (ON), the again will switch
on the larger, higher lamp (900W). The corresponding
indicator light will come on. The party-tent heater will
emit 900W of heat.
Pushing both switches to I (ON) will switch on both lamps.
Both indicator lights will now come on and the heater will
emit 1500W of heat.
By pushing back the switches to O (OFF) you switch off the party-tent heater.
The lights will go out.
The party-tent heater is not equipped with a thermostat and will continue to emit
heat for as long as it is switched on. For that reason, don't leave persons, who
are not able to leave their position on their own, alone with a functioning
Partytent heater! Never leave a functioning party-tent heater unsupervised!
Take always the plug out of the socket when you have switched off the Partytent
heater.
Maintenance and cleaning
Switch the device off, remove the plug from the socket and leave to cool before
performing maintenance or cleaning.
Clean the exterior of the party-tent heater with a soft, damp cloth and, if
necessary, a little cleaning agent. Never use aggressive or abrasive products and
ensure that water never penetrates the device itself!
You will not usually need to clean the reflective screen or the carbon lamps. If
necessary, you could use a vacuum cleaner to suck dirt through the grille. If this is
inadequate, engage a professional. Never open up the device yourself!
16
Advertenties
Inhoudsopgave
