Inhoudsopgave
Advertenties
Handle installation
CAUTION! DO NOT USE POWER TOOLS. CAUTION! BLACK WASHER MUST BE INSTALLED. CAUTION!
OVERSCREWING CAN SHATTER THE GLASS DOOR.
1. Remove the door gasket on the side you wish to install the handle. You can see two designated
holes for handle installation.
2. Install the handle tightly as shown in the diagram above with the two screws, lock washers and flat
washers provided. CAUTION! When you install this handle, don't twist one side too tightly. Twist
the upper screw firstly but do not tighten it to the limit, then twist the lower screw. After that, you
can slowly tighten the two screws to the limit. CAUTION! If you twist the upper screw to the limited
then twist the lower screw, the glass will probably be broken.
3. Replace the door gasket.
Reversing the door
The door can be changed from left and right side. No special requirement, all the door is opened from
left side. If required to open from right side please refer to the following direction.
1) Screws
2) Decoration plug
3) Top hinge pin
4) Right top hinge plate
5) Glass door
6) Left top hinge plate
7) Lower hinge plate
8) Lower hinge pin
9) Screws
10) Cabinet
11) Screws
12) Lower hinge plate
13) Screws
14) Lower part of the cabinet
51
Advertenties
Inhoudsopgave
