Inhoudsopgave
Advertenties
6.4. Removing and reinserting a drawer/
glass shelf
To remove a drawer (9) or a glass shelf (2/3), open the
freezer door (4) fully.
Pull out the drawer (9) with both hands and remove
the drawer (9) from the freezer compartment at a
slight angle.
To remove the large glass shelf (2), first open the freez-
er compartment with the flap (10).
Lift the glass shelf (2/3) and remove it from the guide
at a slight angle.
To reinsert the glass shelf (2/3), first place it in the rear
guide at a slight angle and then carefully insert it in
the front guide.
To reinsert a drawer (9), slide the drawer (9) into the
appliance at a slight angle.
7. Operating the appliance
For more detailed information about your product, please
refer to the user manual.
Connect the appliance to an earthed mains socket. The
local mains voltage must match the voltage stated in
the technical specifications for the appliance.
The temperature control setting automatically adjusts the
temperature in the freezer compartment.
There is a choice of 3 settings on the temperature control:
1
Lowest level of cooling
(warmest)
2
Intermediate position
3
Highest level of cooling
(coldest)
Before storing fresh foods, set the temperature control
3
(1) to position
.
The internal temperatures can be influenced by factors
such as the installation location, ambient temperature and
the number of times the door is opened. Take these fac-
tors into account when setting the temperature control.
Short-term storage of
frozen products
Medium-term storage
of frozen products
Long-term storage of
frozen products
Audible noises such as cracking, humming or gurgling
are caused by the expansion and shrinkage of the com-
ponents as a result of the temperature changes or by the
compressor working and do not indicate a malfunction.
Check the temperatures in the freezer compartment
with a thermometer. The ideal temperature in the
freezer compartment is -18°C. Once this temperature is
reached, you can load it with food and set the temper-
ature control (1) back to
After switching on for the first time, the appliance
needs approx. 24 hours to reach this temperature.
7.1. Switching off the appliance
To switch off the appliance, briefly turn the tempera-
ture control (1) past position 1 to position . You will
hear a click. Then pull the mains plug (8) out of the
mains socket.
Wait approx. 10 minutes before switching on the appli-
ance again.
8. Cleaning and maintenance
For information on how to clean, maintain and look after
the appliance, please refer to the user manual.
9. Disposal
DANGER!
Risk of choking and suffocation! Risk of injury!
To avoid risks to children, proceed as follows before dis-
posing of the appliance:
Remove the freezer door and the door seal or tape the
freezer door closed.
Leave the drawers (9)/shelves (2/3) in the appliance so
that no children or other persons can climb into the
appliance.
PACKAGING
Your appliance has been packaged
to protect it from damage in transit.
The packaging is made of materials
that can be recycled in an environ-
mentally friendly manner.
Observe the following labels on the packaging
materials regarding waste separation with the
abbreviations (a) and numbers (b):
1–7: plastics/20–22: paper and card-
board/80–98: composite materials.
(France only)
The "Triman" symbol tells the consumer that
the product can be recycled, is covered by an
extended system of manufacturer's responsi-
bility and must be sorted by material type in
France.
2.5
.
DE
FR
NL
ES
IT
EN
51
Advertenties
Hoofdstukken
Inhoudsopgave
