Advertenties
power tool may become live, for example, when an electric cable is damaged accidentally. This
presents a serious risk of electric shock.
▶
Check the power tool's supply cord at regular intervals and have it replaced by a qualified
specialist if found to be damaged. If the power tool's supply cord is damaged it must be
replaced with a specially-prepared and approved supply cord available from Hilti Customer
Service. Check extension cords at regular intervals and replace them if found to be damaged.
Do not touch the supply cord or extension cord if it is damaged while working. Disconnect
the supply cord plug from the power outlet. Damaged supply cords or extension cords present
a risk of electric shock.
▶
Dirty or dusty power tools that have been used frequently for work on conductive materials
should be checked at regular intervals at a Hilti Service Center. Dust (especially dust from
conductive materials) or dampness adhering to the surface of the power tool may, under unfavorable
conditions, lead to electric shock.
Work area
▶
Keep bystanders a safe distance away from work area. Anyone entering the work area must
wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly
away and cause injury beyond the immediate area of operation.
▶
If the work involves breaking right through, take the appropriate safety measures at the
opposite side. Parts breaking away could fall out and / or fall down and injure other persons.
Description
Overview of the product
Dust shield
@
TE-C Click chuck
;
Forward / reverse switch
=
Lockbutton for continuous operation
%
Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry and natural stone.
Hilti products are designed for professional use and may be operated, serviced and maintained only
by trained, authorized personnel. This personnel must be informed of any particular hazards that may
be encountered. The product described and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
▶
The power tool may be operated only when connected to a power supply providing a voltage and
frequency in compliance with the information given on its type plate.
Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and accessories. Spare parts,
accessories and consumables approved by Hilti for use with this product can be found at your
Hilti Center or at www.hilti.group.
Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific
type identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the tool. The operating voltage of
the transformer or generator must always be within +5 % and -15 % of the rated voltage of the tool.
13
1
Grip
&
Supply cord
(
Control switch
)
Side handle with depth gauge
+
238043
*238043*
Advertenties
