Inhoudsopgave
Advertenties
8. Cleaning and care
For information on how to clean and look after the appliance, please refer to the detailed user
manual.
Empty the dust container and clean the filter regularly.
WARNING!
Risk of electric shock!
There is a risk of electric shock due to live parts.
Always unplug the mains plug from the socket before cleaning the vacuum cleaner, do
not pull on the cable, but pull the plug instead.
NOTICE!
Possibility of damage to the appliance!
The wrong cleaning agents can damage the surfaces or the printing on them.
Never use acidic, abrasive or granular, acetic-acid-, soda- or solvent-based cleaning
agents. These may damage the appliance surfaces or the printing on it.
9. Troubleshooting
If the appliance stops working properly, please refer to the troubleshooting table shown be-
low to see if you can resolve the problem yourself.
Never attempt to repair the appliance yourself. If a repair is necessary, please contact our Ser-
vice Centre or a suitable authorised repair workshop.
Problem
The vacuum cleaner is
not working.
The suction power is
reduced.
The vacuum cleaner
makes unusual noises
during operation.
84
Check the mains plug/socket.
Press the foot switch
Suction pipe, hose, or nozzle is blocked.
Unplug the mains plug and remove the blockage.
Dust filter is dirty.
Unplug the mains plug and clean the filters.
Switch off the vacuum cleaner immediately.
Unplug the mains plug.
Check whether there is a blockage or the filters are dirty.
If necessary, clean the filters and/or remove the blockage.
Solution
.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
