Inhoudsopgave
Advertenties
6. Preparing the vacuum cleaner
Insert the suction hose into the suction piece.
Connect the suction piece and the telescopic extension together.
Insert the bayonet connection of the suction hose into the opening beneath the dust
container and secure the suction hose by turning it clockwise.
Make sure that the dust container is inserted correctly.
Unwind the mains cable to the yellow mark by pulling the handle of the mains plug.
When the red mark is visible, the cable is fully unwound and further pulling can damage
the cable drum. You should therefore unwind the cable carefully and slowly as soon as
the yellow mark is visible.
Plug the mains plug into a properly installed earthed power socket.
Your vacuum cleaner is now ready for use.
7. Vacuuming
The detailed user manual contains in-depth information on how to use the appliance.
Press the foot switch
To vacuum, push or pull the nozzle over the area to be cleaned.
7.1. After vacuuming
Press the foot switch
Unplug the mains plug from the socket, do not pull on the cable, but pull the plug in-
stead.
Press the foot switch
CAUTION!
Risk of injury!
There is a risk of injury from the cable swinging wildly.
Hold the cable firmly to prevent the cable from swinging back and forth.
To store the vacuum cleaner, place it in a dry place without exposure to direct sunlight.
to switch the vacuum cleaner on.
to switch off the vacuum cleaner.
to wind up the cable.
DE
FR
NL
ES
IT
EN
83
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
