Advertenties
•
Secure the rope in such a manner that the weight of the pump is not borne by the delivery pipe or
the power cable.
The pump must be positioned at least one meter above the bottom of the well. Sand and other
!
abrasive substances found in the pumped liquid will cause rapid deterioration of the pump and
will reduce its efficiency.
!
Before starting the pump, make sure that the delivery pipe is unobstructed
!
Never operate the pump with the delivery port closed.
6. Start-Up
•
Insert the plug in the power outlet.
7. Switching Off the Pump
•
Pull out the plug from the power outlet.
8. Recommendations/Maintenance
This pump does not require any particular maintenance operations.
WARNING! ELECTRIC SHOCK HAZARD
!
Before proceeding to carry out any maintenance or cleaning operations (in case of malfunction),
disconnect the pump from the power source.
All repair operations must be performed by an authorized service centre only.
!
If the power supply cable is damaged, it must be replaced by the Manufacturer or authorized
service centre.
8. . Frost Protection
Protect the pump and pipe from frost.
!
If necessary, drain the pump and pipe and store them in a protected location.
ENGLISH
Advertenties
