Advertenties
•
A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
3.3
Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
3.4
Speed preselection
This angle grinder has adjustable speed preselection with 6 speeds:
•
AG 125 7SE: 6000 - 11500 rpm
•
AG 125 8SE: 3500 - 11500 rpm
3.5
Restart interlock
The power tool does not restart by itself when the on/off switch is locked in the on-position and the power
returns after an interruption in the electric supply. The on/off switch must first be released and then pressed
again to restart.
3.6
Front cover for the guard
Use the standard guard with front cover for the applications listed below:
•
Grinding with straight grinding wheels
•
Cutting with cut-off wheels
3.7
DG-EX 115/4,5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8
DC-EX 125/5"C dust hood for cutting (accessory)
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
3.9
Dimensions and format of suitable diamond slitting wheels
Diamond slitting wheels must meet the following require-
ments in terms of dimensions and format.
Technical data
Slot width between segments
(G)
Cutting angle
4
Consumables
Use only synthetic-resin-bonded, fiber-reinforced wheels with a maximum Ø of 125 mm approved for a
rotational speed of at least 11500 rpm and a peripheral speed of 80 m/s.
WARNING! When cutting or slitting with cut-off wheels, always use the standard guard with additional
cover plate.
*2177169*
2
≤ 10 mm
Negative
2177169
3
4
English
23
Advertenties
