Advertenties
Description
Overview of the product
Sawdust ejection
@
On/off switch
;
Cutting angle scale
=
Clamping screw for blade angle adjust-
%
ment
Clamping screw for fence
&
Cutting line indicator
(
Cutting depth scale
)
Pivoting guard
+
Fence
§
Riving knife
/
Intended use
The product described is a hand-held circular saw. It is designed for cutting wood or wood-like
materials, plastics, gypsum plasterboard, gypsum fiberboard and composite materials, up to a
cutting depth of 85 mm (3.35 in).
The circular saw is equipped with a removable connector for an optional vacuum cleaner / dust
removal hose. This connector is designed to fit standard suction hoses. In order to connect the
vacuum cleaner hose to the saw, use of a suitable adapter may be necessary.
Possible misuse
The use of saw blades that do not comply with the specifications given in the technical data or the
use of cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible.
Sawing metals is not permissible.
Items supplied
Circular saw, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with the product can be
found at your local Hilti Center or online at: www.hilti.group
Technical data
Product properties
For details of the rated voltage, frequency, current and input power, refer to the country-specific
type identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output
must be at least twice the rated input power shown on the rating plate of the device. The operating
voltage of the transformer or generator must always be within +5 % and -15 % of the rated voltage
of the device.
Product generation
Power output
No-load speed
Speed under load
Cutting speed under no load
18
1
Securing screws for riving knife
:
Switch-on interlock release button
∙
Suction adapter
$
Clamping screw for fence
£
Lock for cutting depth
|
Base plate
¡
Drive spindle lock button
Q
Air vents
W
Hex key
E
Auxiliary grip
R
Adjusting lever for cutting depth
T
WSC 85
01
1,260 W
4,500 /min
3,100 /min
54 m/s
314714
*314714*
Advertenties
