Inhoudsopgave
Advertenties
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V
Rated voltage
P
Power Input
n
No-load speed
0
Rotation only function
Rotation and impact function
Concrete
Switching ON
Switching OFF
On / Off switch lock-on
Change rotation speed - High speed
Change rotation speed - Low speed
Clockwise rotation
Counterclockwise rotation
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
(1) Chuck wrench (Spec. only for keyed chuck) ................1
(2) Side handle ..................................................................1
(3) Depth gauge ................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ By combined actions of ROTATION and IMPACT:
Boring holes in hard materials (concrete, marble, granite,
tiles, etc.)
○ By ROTATIONAL action:
Boring holes in metal, wood and plastic.
SPECIFICATIONS
Voltage*
1
Power input
Speed range
Forward
rotation
No load
speed
Reverse
rotation
Steel
Capacity
Concrete
Wood
Full-load impact rate
Weight*
2
*1 Be sure to check the nameplate on product as it is
subject to change by areas.
*2 Weight: According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action
Fixing and removing side handle
Using depth stopper
Mounting and dismounting of the
bit (For keyed chuck)
Mounting and dismounting of the
bit (For keyless chuck Type A)*
Mounting and dismounting of the
bit (For keyless chuck Type B)*
Selecting rotation direction
Selecting the operating mode
Switch operation*
3
Locking-on the switch
Releasing the switch
Change rotation speed
Selecting accessories
Selecting the appropriate drill bit
○ When boring concrete or stone
Use the drill bits specifi ed in the Optional Accessories.
○ When boring metal or plastic
Use an ordinary metalworking drill bit.
○ When boring wood
Use ordinary woodworking drill bit.
However, when drilling 6.5 mm or smaller holes, use a
metalworking drill bit.
*1 Type A (Fig. 4)
(1) Mounting the bit
Turn the lock collar in the direction "AUF" and open the
chuck. After inserting the drill bit into the chuck as far it
will go, turn the lock collar in the "ZU" direction. Grip the
ring and close the chuck by turning the sleeve clockwise
as viewed from the front.
4
(110 V, 220 V, 230 V, 240 V)
790 W*
1
1
2
0 – 1000 min
0 – 3000 min
-1
0 – 600 min
0 – 1800 min
-1
13 mm
8 mm
20 mm
13 mm
40 mm
25 mm
8000 min
26000 min
-1
2.5 kg
Figure
Page
1
2
3
4
1
5
2
6
7
8
9
10
11
―
-1
-1
-1
100
100
100
100
100
101
101
101
101
101
102
103
Advertenties
Inhoudsopgave
