Inhoudsopgave
Advertenties
• Lower the sharpener group (10) until it locks.
• Secure the group by turning the locking knob (23). See
Fig. 2.
• Switch on.
• Press button (26) and let the blade turn for about 1
minute. When the blade is still, check to see if any burr
has formed on the edge.
• After having verified the presence of burr, switch (5) on
and gently press button (27) for about 3 seconds to
remove the burr produced during sharpening. Put the
graduated knob (6) back to "0" position.
• After sharpening, move the sharpener group (10) back
to its original position, see Fig. 3 and clean the edge of
the blade and the wheels by alcohol.
• After several sharpening operations, remove any
residue from the sharpening wheel with alcohol and a
brush.
BLADE REPLACING
The blade has to be replaced when it is no more
possible to sharpen it or when the distance between the
cutting part of the blade and the blade protector is more
than 6 mm. Return appliance to the nearest authorized
service facility to replace the blade.
Advertenties
Inhoudsopgave
