Inhoudsopgave
Advertenties
Cleaning and Maintenance
Daily care. Open the cap of the water outlet (9) and drain the remaining
water from the tank. Detach the nozzle using button (7) as shown in Figure E.
Rinse the tank and nozzles under warm running water without using any
cleaning agents and dry them thoroughly.
Total care. Perform the total care of the water tank once per week. To do this,
detach the tank as shown in Figure F. Rinse its inside and outside under
warm running water using a soft brush or sponge, without cleaning agents,
and dry it thoroughly.
Troubleshooting
The device does not turn on. Possible reason: the battery is low. Solution:
сharge the device for at least 3 hours.
The device does not eject water. Possible causes: the outlet of the nozzle is
clogged; there is no water left in the tank. Solution: clean the outlet of the
nozzle; fill the tank with water.
ATTENTION! If none of the suggested solutions has helped you solve the
problem, contact the supplier or service centre. Do not disassemble the device
or attempt to repair it yourself.
ASBISC reserves the right to modify the device and to make changes and additions to
this document without prior notice to users.
The warranty period and service life is 2 years from the date of retail sale of the device.
Manufacturer: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol,
Cyprus. Made in China. All trademarks and brands mentioned herein are the property
of their respective owners. The date of manufacture is indicated on the package.
Up-to-date information and a detailed description of the device, as well as connection
instructions, certificates, information on companies that accept quality claims and
warranties are available at aeno.com/documents.
aeno.com/documents
17
Advertenties
Inhoudsopgave
