Inhoudsopgave
Advertenties
Press the button (3) to turn on the device. The operating mode indicator on the
irrigator panel (5) will light up. Use the mode selection button (4) to select the
desired mode.
Operating Modes of the Device
"Beginner" – gentle cleaning for sensitive teeth and gums. Also
recommended for those using the device for the first time;
"Light" – uniform cleaning before moving on to intensive cleaning;
"Medium" – daily standard cleaning, plaque removal;
"High" – intensive cleaning, thorough oral care;
"Spot" – removal of food debris from interdental spaces, prevention of tartar
formation.
Note. The "Spot" mode does not have its own indicator on the mode selection
panel (5). When the device is operating in this mode, all four panel indicators
are lit up.
By default, the device is set to "High" operating mode the first time it is turned
on. Subsequent single presses of the mode selection button (4) alternately
change the operating modes, which are displayed on the panel (5). The last
selected mode is saved in the device memory and will be automatically
selected the next time the irrigator is turned on. After selecting the mode,
move on to device operation.
Device Operation
Direct the outlet of the nozzle (1) into your mouth cavity. Tap button (3) to turn
on the device. Move the outlet of the nozzle (1) along the gum contour as shown
in Figure H. During cleaning, you can switch the operating modes using
button (4). After cleaning is complete, tap button (3) to turn the device off. If
the device is not turned off after use, it will automatically switch off after no
more than 2 minutes. After each use, rinse the device and the used nozzles as
described in the "Cleaning and Maintenance" section ("Daily care").
Note. It is not recommended to use nozzle (15) in the "Spot" mode to avoid
injuring periodontal pockets.
16
aeno.com/documents
Advertenties
Inhoudsopgave
