USING THE TIMER CONTROL BUTTON
Pressing the timer control button (13) will set the timer. This interval
period is shown in the display (8) on the control panel on the side of
the electric fireplace. There are total 8 levels timer settings, from 0.5hr
- 1 hr - 2hr - 3hr - 4hr - 5hr - 6hr - OFF.
USING THE WEEK TIMER CONTROL BUTTON
Note:
Besides a regular timer function, this unit also equipped with week
timer function, to setup the time when to turn on and off the heater
with desired temperature, one group each day and max. 7 days/
group available. if stop pressing any of those buttons for more than 5
seconds, will quite the week timer function and confirm the previous
setting.
USING THE TIMER BUTTON (13) ON CONTROL PANEL TO SETUP
THE WEEK TIMER
Press and hold the timer button (13) on control panel for 5 seconds
to input current local time(01,02,03, ...21,22,23) by pressing flame
button (11) or thermostat control button (12), then press timer button
(13) again to confirm previous setup and the digital display will show
"1d" to start setup 1st group and re-press the timer button (13) once
and right after the digital display showing "--" to setup the UNIT-ON-
TIMER by pressing flame button (11) or thermostat control button (12)
and press timer button (13) again and after digital display showing "--"
to setup UNIT-OFF-TIMER by pressing flame button (11) or thermostat
control button (12), then press the timer button(13) once to confirm
the previous settings and after the digital display showing "--" to setup
the temperature desired; and repeat to setup 2d,3d, .. ,7d; to skip a
specified day/group, by continue pressing timer button(13) to select
and setup the timer function on the specified date desired.
USING THE REMOTE CONTROL TO SETUP THE WEEK TIMER
Press the week timer button (14) 1st time to activate the function
and setup the current local time by pressing week timer adjustment
buttons (15) "+"/"-" and re-press the week timer button (14) and
display (B) will show"1d", and press again the week timer button (14)