Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
on the ratings plate of the heater. Devices marked with 230 V can
also be operated at 220 V. Before use it is imperative to ensure that
the installation location corresponds to the requirements of the safety
instructions.
Note: When the heater is turned on for the first time, a slight,
harmless odour can develop. This odour develops due to the heating
up of the inner heating elements. Provide sufficient ventilation.
Note: Your heater is fitted with a safety device that will switch off
the heater in case of overheating. If the heater stops working, tum
the heater off and inspect inlet and outlet for blockages. Unplug the
appliance and wait at least 10 minutes for the protection system to
reset before attempting to restart the heater. If the safety device still
switches the heater off and prevents the heater operating, take the
heater to your nearest service center for inspection and repair.
ATTENTION! Before restarting the heater, it must be
unplugged for at least 10 minutes.
Note: This product equipped open window detection function, when
the products detected the room temperature decreased over 3
comparing to the temperature set within 0.5 hour, the unit will stop
providing the heat and the display screen will show "00".
USING THE MANUAL AND REMOTE CONTROLS
Note:
Before using the fireplace please make sure set the toggle switch(5)
to the position I. Set the toggle switch(5) to the position O if you
would like to turn off the unit. On the top-right side plate of the electric
fireplace is the control panel(6). This panel contains the buttons to
properly operate the electric fireplace. The buttons on the control
panel on the side of the electric fireplace and the remote control
function in the same way. The remote control has an effective range of
up to 13 feet.
Advertenties
Inhoudsopgave
