Inhoudsopgave
Advertenties
Displaying the ambient temperature
Alignment of the ambient temperature
This function is used to edit the ambient
temperature measured by the radiator
and used to manage heating power, if it
needs to be corrected to compensate for
reading errors due to things like being
near to heat sources, or cold air
draughts.
Remote control
This function allows the radiator to be
controlled using external timers, piloted
sockets with telephonic control, and
similar devices.
For further details see paragraph 6.3.2.
6.3.1 Open window sensor
This function makes it possible to detect an open window and automatically activate the Anti-freeze operating mode.
If a sudden reduction is temperature is detected when the radiator is operating normally, anti-freeze mode is activated
automatically to reduce energy wastage. On the display the window and anti-freeze symbols flash together, while the
symbol for the operating mode set by the user stays on.
Reinstating normal operation does not occur automatically, but must be activated by pushing the "M" key.
Important:
Correct operation of this function may depend on where the radiator is positioned in the room, the presence of draughts, the
outside temperature, and how long the window stays open.
6.3.2 Remote control
This function allows the radiator to be controlled using external timers, piloted sockets with telephonic control, and similar
devices. When the function is active, if the radiator's power supply is reinstated after being interrupted for more than 30
minutes, when it is switched on Stand-by mode is not set as normally happens, by Comfort mode starts immediately. The
comfort temperature is as set before the power supply was interrupted. The (optional) presence sensor and open window
sensor are deactivated. This means that the radiator can be switched on without being in the room.
The
temperature measured by the radiator.
The display flashes the correction value
to be applied. To edit it, push the "+" or "-
" keys.
If, for example, the temperature set on
the radiator is 19,2°C and the ambient
temperature is measured at 19,5°C, align
it by +0,3°C.
temperature to settle, before doing any
alignment.
Switching the function (ON) or (OFF) is
done by pushing the "+" or "-" keys
respectively.
Warning: Activation is NOT indicated by
any icon on the display.
27
display
shows
the
Always wait at least 4 hours for the
ambient
Advertenties
Inhoudsopgave
