Download Inhoudsopgave Inhoud Print deze pagina

Using The Pilot Wire; Setting The Temperatures; Setting The Day And Time - Radialight ICON Handleiding

Inhoudsopgave

Advertenties

The programmes P2 and P3 are preset and cannot be changed, other than in the case of comfort and eco temperature
values.
To set the temperatures (valid for all programmes):
- Select Comfort operating mode and set the relevant temperature.
- Select Eco operating mode and set the relevant temperature.
- Select the programme required P1, P2 or P3.
Please note:
When you select programme P1 without ever having set the current date and time, the system will
automatically switch to the regulation mode explained in paragraph 6.2.5.

6.2.3.2 Using the pilot wire

If a connection cable is supplied without a plug, the radiator can also be controlled using specific programmers.
The comfort temperature used in Pilot Wire mode is set, as already explained for the preset programmes, by going to
Comfort mode first, using the "M" key and then selecting the value required using the "+" and "-" keys.
Please note: In Pilot Wire mode, the Eco temperature is always equal to the Comfort temperature less 3,5°C.

6.2.4 Setting the temperatures

The radiator is characterised by 2
reference temperatures, comfort and eco,
which can be set independently.
The preset comfort temperature is 19,0°C
and can be changed using the "+" o "-"
keys.
The preset eco temperature is 15,5°C
and can be changed using the "+" or "-"
keys.
If the ambient temperature is lower than the temperature required and displayed, the heating indicator switches on, on the
display
.

6.2.5 Setting the day and time

The day and time are set to be able to
use the 3 preset programmes, and this
can be done by holding down the mode
key.
Push the mode key to confirm the day set
and move on to setting the time.
22
An arrow to the right of the display moves
along a scale from green to red to
indicate whether the temperature differs
more or less from the recommended
value of 19°C.
If the comfort temperature is set at a
value lower than the eco temperature,
the latter is automatically reset at the
comfort value - 0,5°C.
The recommended difference between
the comfort and eco temperature values
is 3,5°C. If the difference set differs from
the suggested value, the eco symbol
changes as follows:
The maximum value that can be set for
the eco temperature is equal to the
comfort temperature value - 0,5°C.
The day flashes the day to be set (1 =
Monday). To edit it, push the "+" or "-"
keys.
The display flashes the hour to be set.
To edit it, push the "+" or "-" keys.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave