Inhoudsopgave
Advertenties
Fig. 2
4
66
of flammable refrigerants. In addition, a set of calibrated weighing scales shall
be available and in good working order. Hoses shall be complete with leak-free
disconnect couplings and in good condition. Before using the recovery appliance,
check that it is in satisfactory working order, has been properly maintained and
that any associated electrical components are sealed to prevent ignition in the
event of a refrigerant release. Consult manufacturer if in doubt.
The recovered refrigerant shall be returned to the refrigerant supplier in the
correct recovery cylinder, and the relevant Waste Transfer Note arranged. Do not
mix refrigerants in recovery units and especially not in cylinders.
lf compressors or compressor oils are to be removed, ensure that they have been
evacuated to an acceptable level to make sure that flammable refrigerant does
not remain within the lubricant. The evacuation process shall be carried out
before returning the compressor to the suppliers. Only electric healing to the
compressor body shall be employed to accelerate this process. When oil is drained
from a system, it shall be carried out safely.
REQUIRED DISTANCE
Respect the required distance of the appliance to walls and other objects. See
illustration 2.
CONTROL PANEL
4
3
D
C
LED INDICATORS
1. WATER FULL-LED
Red
2. COMP-LED
Green
3. DEFROST
Green
4. TIMER-LED
Orange
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The indicator features 3 functions:
1. When you set the humidity, it will indicate the humidity that you have selected
2. When you program the time for the appliance to turn on and off, it will show the
hours.
3. When the environment humidity is lower than 35%, it will show "LO"
4. When the environment humidity is higher than 95%, it will show "HI"
PUSH BUTTON FUNCTIONS
A. Power Push Button
B. DOWN Push Button
C. UP Push Button
D. Timer Push Button
2
1
Fig. 3
B
A
Advertenties
Inhoudsopgave
