Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CE Manufacturer's Declaration
We declare conformity in the sense of the EC directive, EMC directive (2004/108/EC) as well as the low voltage direc-
tive (2006/95/EC). The following harmonised standards apply:
Pos: 78 /Pumpen/Schlammsauger/Alle Pumpen/Schlammsauger/EN-Normen Pumpen/Schlammsauger 12 V @ 3\mod_1154089560536_0.doc @ 20883 @
EN 55014-1, EN 55014-2, EN 60335-1, EN 60335-2-41, EN 60598-1, EN 60598-2-18, EN 61000-3-2, EN 61000-3-3,
EN 61558-2-6
Pos: 79 /Alle Produkte/Unterschrift Hanke @ 0\mod_1126881079296_121.doc @ 5743 @
Pos: 80 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651 @
Pos: 81 /Alle Produkte/Überschriften/H1 Sicherheitshinweise @ 6\mod_1196353926316_121.doc @ 40981 @
Safety information
Pos: 82 /Alle Produkte/Sicherheit/SIC Sicherheitshinweise Einleitung @ 7\mod_1205310799730_121.doc @ 45453 @
The company OASE has built this unit according to the state of the art and the valid safety regulations. Despite the
above, hazards for persons and assets can emanate from this unit if it is used in an improper manner or not in accor-
dance with its intended use, or if the safety instructions are ignored.
Pos: 83 /Alle Produkte/Sicherheit/SIC Kinder und Jugendliche unter 16 Jahren @ 6\mod_1196356502951_121.doc @ 41194 @
For safety reasons, children and young persons under 16 years of age as well as persons who cannot recog-
nise possible danger or who are not familiar with these operating instructions, are not permitted to use the
unit.
Pos: 84 /Alle Produkte/Sicherheit/SIC Gefahr durch Kombination von Wasser und Elektrizität @ 8\mod_1219222159989_121.doc @ 50033 @
Hazards encountered by the combination of water and electricity
− The combination of water and electricity can lead to death or severe injury from electrocution, if the unit is incorrectly
connected or misused.
− Prior to reaching into the water, always disconnect the power supply to all units used in the water.
Pos: 85 /Lampen/Wasserspieltechnik/Water Jet Lightning/SIC Elektrische Installation Water Jet Lightning @ 8\mod_1223328193364_121.doc @ 54023 @
Correct electrical installation
− Electrical installations at garden ponds must meet the international and national regulations valid for installers.
Especially adhere to DIN VDE 0100-702.
− Only use cabes admitted for external use and meeting DIN VDE 0620.
− Ensure that the transformer is protected by a rated fault current of max. 30 mA via a fault current protection device.
− Only connect the transformer when the electrical data of the power supply is identical to that on the type plate.
− Only operate the transformer when plugged into a correctly fitted socket.
− For your own safety, consult a qualified electrician when you have questions or encounter problems.
Pos: 86 /Lampen/Wasserspieltechnik/Water-Trio/Quintet/SIC Sicherer Betrieb Water Trio/Quintet @ 8\mod_1223631813193_121.doc @ 54204 @
Safe operation of the unit
− Keep socket and power plug dry.
− Route the power cables so that damage is excluded.
− Do not carry or pull the units by the connection cables. The power connection cables cannot be replaced. If the
cable is damaged, the entire unit has to be disposed of.
− Never run the pump without water! Otherwise the pump will be destroyed.
− Never use the pump for fluids other than water. Other fluids could destroy the unit.
− Never open the unit or its attendant components, unless this is explicitly mentioned in the operating instructions.
− Never carry out technical modifications to the unit.
− Only use original spare parts and original accessories for the unit. Only have repairs carried out by authorised
customer service points.
− Never look directly into the light source of the unit. The light beam's intensity could irreversibly damage the retina.
Pos: 87 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651 @
Pos: 88 /Alle Produkte/Überschriften/H1 Aufstellen @ 7\mod_1202907856718_121.doc @ 43934 @
Installation
Pos: 89 /Lampen/Wasserspieltechnik/Water Jet Lightning/Aufstellen Water-Jet-Lightning @ 8\mod_1220883652953_121.doc @ 52041 @
Attention! Dangerous electrical voltage!
Possible consequences: Death or severe injury.
− Install transformer and 12 V control box at a minimum safety distance of 2 m from the bank (E).
− Choose an installation place for the transformer and the 12 V control box that is splash-water protected.
Also protect the transformer and the 12 V control box against sun radiation (max. 40 °C).
Installation of the Water Jet Lightning (B, C, D)
Plan the installation of the Water Jet Lightning. When planning, take the cable and hose lengths into account!
Install the Water Jet Lightning horizontally on a firm base. The unit can be installed dry and in the water. When in-
stalled in the water, the upper section of the Water Jet Lightning must protrude out of the water by approx. 8 cm.
− Fasten the unit foot (12) on the base using 2 screws (13) (not included in our scope of delivery).
- GB -
Signature:
13
Advertenties
Inhoudsopgave
