Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2 Safety Notes
The unit corresponds to all relevant directives
of the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage. Leave servicing to
skilled personnel. Inexpert han-
dling may result in electric shock.
•
Caution! Never look into the CD mech-
anism when the CD tray (21) is open;
laser beams may be emitted causing eye
damage.
•
The unit is suitable for indoor use only. Pro-
tect it against dripping water, splash water
and high air humidity. The admissible ambi-
ent temperature range is 0 – 40 °C.
Do not place any vessel filled with liquid on
•
the unit, e. g. a drinking glass.
•
Immediately disconnect the mains plug
from the socket
1. if the unit or the mains cable is visibly
damaged,
2. if a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3. if malfunctions occur.
In any case the unit must be repaired by
skilled personnel.
•
Never pull the mains cable to disconnect
the mains plug from the socket; always
seize the plug.
No guarantee claims for the unit and no
•
liability for any resulting personal damage
or material damage will be accepted if the
unit is used for other purposes than orig-
inally intended, if it is not correctly con-
nected or operated, or if it is not repaired
in an expert way.
If the unit is to be put out of oper-
ation definitively, take it to a local
recycling plant for a disposal which
is not harmful to the environment.
3 Applications
The CD / MP3 player CD-230USB with two
replay units is especially designed for pro-
fessional DJ applications, offering special
features such as single title replay, various
replay effects, change of the replay speed to
up to ±16 %.
With this unit, audio CDs (including CD-Rs
and CD-RWs
1
) can be replayed. MP3 files can
be replayed from CDs, USB flash drives
SD / SDHC memory cards
2
(32 GB max.).
Depending on the type of CD, the CD burner and
1
the burning software used, problems may occur
when replaying CD-RWs.
4 Setting up /
Connecting the Unit
.
The control unit and the replay unit are de-
signed for installation into a rack for units
with a width of 482 mm (19"), but they can
also be used as tabletop units. The replay
unit must always be operated horizontally,
whereas the control unit can be installed
as desired, e. g. also inclined. For rack in-
stallation, 2 rack spaces each are required
for the control unit and the replay unit
(1 RS = 44.45 mm).
Prior to making or changing any connections,
switch off the CD-230USB and the units to
be connected!
1) Use the two connection cables provided to
connect the control unit to the replay unit:
Connect the jack CONNECT TO CONTROL
UNIT A (30) of replay unit A to the jack
CONNECT TO MAIN UNIT A of operating
unit A. Proceed in the same way to make
a connection between replay unit B and
operating unit B.
2) Connect each of the signal outputs LINE
OUT (28, 31) to a line level input of a mixer
or amplifier, for example (likely lettering:
Line, CD, Aux).
3) Connect the mains jack (29) to a socket
(230 V/ 50 Hz) via the mains cable provided.
5 Operation
Switch on the unit with the POWER switch
(26). During the reading process,
will appear on the display (7). After that,
when a CD is inserted, the display will show
information about the CD; if no CD is in-
serted,
will appear on the display.
NO DISC
1) To insert a CD, open the CD tray (21) with
the button
(3 or 25). Insert the CD with
the lettering facing upwards, and close the
CD tray with the button .
Note: The CD tray will be locked as long as a CD
is being replayed. If required, stop the replay with
the button
(17).
2) Additionally or as an alternative, insert a
USB flash drive
2
and / or
insert a memory card
SD / MMC (22) with the notched corner of
the card to the right and facing the unit.
2
and
To remove the card, push the card into the
slot until it disengages.
2
Due to the large number of storage device manu-
facturers and device drivers, it cannot be guaranteed
that all storage media are compatible with the
CD-230USB.
READING
into the USB port (23)
into the slot
2
3) After switching on, the CD drives are
always selected. To select the USB flash
drive or the memory card, press the button
CD / USB / SD (11) the appropriate number
of times. The LEDs (4) above the jog wheel
will indicate the replay medium selected.
Note: A different replay medium can only be
selected in the pause mode. If required, use the
button
to set the player to pause.
4) All the other operating options are listed
in the tables on the following pages. After
operation, switch the CD/ MP3 player off
with the POWER switch.
6 Maintenance of the Unit
Protect the unit against dust, vibrations,
humidity and heat (admissible ambient tem-
perature: 0 – 40° C). For cleaning only use a
dry, soft cloth; never use water or chemicals.
Note concerning sound interruptions and
reading errors
Cigarette smoke and dust will easily pene-
trate through all openings of the unit and will
also settle on the optics of the laser sampling
systems. If this deposit should cause reading
errors and sound interruptions, the unit must
be cleaned by skilled personnel. Please note
that there will be a charge on cleaning, even
during the warranty period!
7 Specifications
Frequency range: � � � � � � � 20 – 20 000 Hz
THD: � � � � � � � � � � � � � � � � < 0�1 %
Channel separation: � � � � > 80 dB
Dynamic range: � � � � � � � � > 90 dB
S/N ratio:� � � � � � � � � � � � � > 80 dB
Output: � � � � � � � � � � � � � 2 V (line level),
RCA jacks
Anti-shock memory: � � � � for CDDA 10 sec�
for MP3 15 sec�
Power supply: � � � � � � � � � 230 V/ 50 Hz
Power consumption: � � � � 30 VA max�
Ambient temperature: � � � 0 – 40° C
Dimensions (W × H × D)
Control unit: � � � � � � � � � 482 × 88 × 100 mm,
2 RS
Replay unit: � � � � � � � � � 482 × 88 × 270 mm,
2 RS
Weight: � � � � � � � � � � � � � � 6�1 kg
9
Advertenties
Inhoudsopgave
