Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18),
into position.
on
To tension the safety harness of the child car
seat, pull the adjustment strap (E) (Fig. 26) of
ots
the harness, until the harness straps adhere to
B);
the child's body correctly.
WARNING! Do not over-tighten the harnesses
.
around the child: If you can insert one finger
d is
between the harness and your child's shoul-
ck-
ders, it means that it is tightened correctly.
ch
8. ADJUSTING THE INCLINATION OF THE
CHILD CAR SEAT
he
20).
The child car seat can be reclined to 4 positions.
kle
To adjust the inclination of the child car seat,
der
pull the reclining lever (J) (Fig. 27).
are
To make reclining as easy as possible, we rec-
ed
ommend doing so with the child car seat in
an intermediate position.
car
9. INSTALLING THE SIDE SAFETY SYSTEM
of
to
The Side Safety System is a device that is in-
stalled on the door side for utmost protection
ses
in the case of a side impact.
ger
To install it, insert the end in the hole in the
ul-
structure, press the central portion and rotate
tly.
it (Fig.28).
not
10. BUILT-IN MIRROR
ng
The car child seat is equipped with a mirror
on
that allows you to check the position of the
ntil
child while driving; it is possible to adjust the
or-
inclination of the mirror by acting on it with a
light pressure (Fig. 29)
AR-
11. MAINTENANCE
The cleaning and maintenance of the product
ar-
must only be carried out by an adult.
o 8
How to clean the fabric cover.
ent
The child car seat's fabric cover can be removed
and cleaned by hand or in a washing machine
he
at 30°C. Please refer to the care label for instruc-
hat
tions on cleaning the seat fabric.
at
To
Machine washable at 30°C.
30° C
(F)
ntil
Do not bleach
C
ase
ick
Do not tumble dry
tly
Do not iron
Do not dry clean
Never use abrasive detergents or solvents. Do
not dry the fabric cover within a dryer, let it dry
without squeezing it.
The fabric cover must only be replaced with
another cover approved by the manufacturer,
since it is an integral part of the child Car seat
and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child
car seat, never use it without its fabric cover.
Now remove the cover following the instruc-
tions below:
Press the restrain harnesses adjustment but-
ton and, at the same time, hold the two har-
nesses of the child car seat, located under the
shoulder straps, and pull in your direction to
loosen them;
Unfasten the safety harness, pressing the red
button on the buckle;
Remove the cover starting from the two hooks
under the seat near the reclining button (Fig. 30);
Release the press-studs in the centre of the
backrest and pull out the ends inserted in the
relevant slots of the child car seat (Fig. 31).
To complete removal, remove the headrest
from above (Fig. 32); complete removal by
pulling out the lower part of flap (Fig. 33)
How to clean the plastic or metal parts
Clean the plastic and coated metal parts with a
damp cloth only. Never use abrasive detergents
or solvents.
The moving parts of the child Car seat must
not be lubricated.
CHECKING THE CONDITION OF THE COM-
PONENTS
It is recommended to regularly check the con-
dition of the following components to make
sure they are not damaged or worn:
• fabric cover: check that the padding does
not come out from the seams. Check the
condition of the seams: they must always be
intact and undamaged.
• belts: check that the fabric lining is not frayed
23
Advertenties
Inhoudsopgave
