EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Tank [1] with pump [2], hose [4] with discharge filter [34], shut-off valve [9], instructions for
use [5], carrying strap [6] and spray wand [7], elbow [50], cap nut [37]. (Fig. 1)
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty / Gross weight max. 1.7 / 6.7 kg (3.8 / 14.8 lb) 2.9 / 10,9 kg (6.4 / 24 lb)
Material of tank
Spray wand
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
1. Fasten the carrying strap [6] on the tank [1] (Fig. 2)
2. Push the hose [4] with the discharge filter [34] into the tank and secure it with the cap
nut [37]. (Fig. 3)
3. Push the tube [4] into the shut-off valve [9] and secure it with the cap nut [37]. (Fig. 3)
4. Screw the spray wand [7] onto the shut-off valve [9] (Fig. 3)
5. Srew the elbow [50] onto the spray wand [7] (Fig. 3)
Checks
Visual inspection: Are the tank [1], pump [2], hose [4], shut-off valve [9], piston pressure
gauge[16], and spray wand [7] and elbow [50] with nozzle [21] undamaged? (Fig. 1)
+
Pay special attention to the connections between the tank – hose and the hose – shut-off
valve and to the condition of the pump threading and spray wand.
No leaks: Pump up the empty device to 2 bar (29 psi) (Fig. 11).
► The pressure must not decrease more than 0.5 bar (7,35 psi) within 30 minutes.
Function: Pull up the piston pressure gauge handle [16]. (Fig. 5)
► The pressure must dissipate.
+
Using the lock [40] the lever on the shut-off valve [9] can be locked and unlocked.
Unintentional spraying is prevented after locking. (Fig. 14)
► If required, reset the lock [40] and activate the shut-off valve [9]. (Fig. 14)
► The shut-off valve must open and close.
Check the device regularly and after a longer period of non-use, e.g. a winter break.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
3237F..
3237P..
5 l (1.1 gal)
6.9 l (1.5 gal)
3 bar (43.5 psi)
30 °C (86 °F)
polyethylene
brass
on the side
< 0.04 l (< 0.01 gal)
1.0 l/min (0.22 gal/min)
15
ENGLISH
3278P..
3278F..
8 l (1.8 gal)
10 l (2.2 gal)
40 °C (104 °F)
plastic
< 5 N
brass