Advertenties
Beschikbare talen
Beschikbare talen
6 Remote control (Optional).
7 Use of the heater with remote control.
1.
Plug the heater into an outlet that is suitable for the voltage and ampere.
2.
Press the on button.
3.
Press the Heat setting button and set 1 of the 4 settings.
4.
Click the up or down button to set the temperature.
5.
Press the timer button, adjust the time with the up and down buttons before it
turns off. Between 0 - 24 hours.
6.
Press the display button to display the temperature. Press the button twice to see
only the heat symbol.
7.
Press the Smart heating button, the heating will now go into smart modes. the heat
setting now changes automatically due to the temperature and the light of the
Smart mode lights up.
8.
Thanks to the motion detection button, the heating only turns on when motion is
detected. If no movement is detected, the heating will turn off after 2 minutes.
When the motion detection function is on, the indicator of this function is lit.
9.
Press the switch and then the child lock button, the heating is now locked and no
longer responds to the buttons. Unlock the heating by pressing the child lock and
switch.
10.
Press the Toggle button and then the Up button to change the temperature
between Fahrenheit and Celsius.
11.
Press the toggle and heat button to enable the window detection function. The WO
lamp lights up. When the temperature changes 3 degrees within 2 minutes, the
heating switches off automatically.
12.
Press the toggle and display button to display the voltage.
13.
Press the on/off button to turn off the heating.
1.
On/off button
2.
Timer
3.
Up button
4.
Heat setting
5.
Smart heating button
6.
Child lock
7.
Down button
8.
Toggle button
9.
Display button
10.
Motion detection button
6
Advertenties
