Advertenties
Beschikbare talen
Beschikbare talen
5 Assembly.
Muur ophanging
A
B
C
Plafond ophaning
Remove the expansion rubber and screws from the
accessory bag, drill four holes with a diameter of 8mm
on the wall, the hole depth is 70mm, the hole distance is
32mm,(300mm≤L≤450mm) install the expansion rubber
in the fitting in the hole, and then mount the wall bracket
from the accessories. Remove it and fix it to the wall with
a 5*60 screw.
Place the wall bracket on the corresponding screw on the
back of the heater, and then adjust the wall bracket to the
proper position with the nut from the accessory bag and
then lock it to ensure it will not loosen.
Lock the wall bracket mounted on the back of the heater
and the wall, adjust the heater to a suitable position, and
lock the lock with the nut and screw from the accessory
sleeve to ensure that it will not loosen.
5
Advertenties
