Advertenties
Beschikbare talen
Beschikbare talen
4 Important during installation.
Before installation and during installation, make sure that the heater is always
disconnected from the power supply and in a cool condition.
The heater can be installed horizontally or vertically.
When installing in the wall and ceiling, the lowest point of the heater should hang
more than 6 feet from the ground so that the heater cannot be directly touched
during use.
When installing in a wall or ceiling, the heater must not be placed at an angle of
more than 90 degrees or less than 45 degrees.
If the heater is installed vertically or almost vertically, make sure that the power
cord is always under the heater.
During the use of the heating element, the temperature of the heating element rises
slightly. Make sure that the power cord never touches the heating element and is
kept away from the housing of the heating element.
Do not install the heater on the surface of flammable materials.
When installing the heater, make sure that the distance between the heater and the
surface of the combustible material is always wide to avoid fire.
Ensure that the heater is always at least 0.5 m from the ceiling and adjacent walls.
If you want to use the heater outside, use a weatherproof, earthed and qualified
socket.
The heater must be installed on the mounting bracket supplied by the
manufacturer (see Figure A below).
Do not use this heater with a programmer, timer, separate remote control system or
any other device that automatically turns the heater on or other equipment that
automatically turns the heater on, as this could disrupt the heater and cause a fire.
Note: Do not place the heating element directly under a wall socket.
4
Advertenties
