Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Malfunction
Remote control does
not work, or only works
sporadically
Alarm does not work
Alarm light does not
work.
© sonoro audio GmbH 2018
Possible cause
Distance too great
Battery empty
Malfunctions due to other
radio transmitters or devices
Alarm is not switched on
Alarm volume is set to
minimum
Headphones are connected
sonoroLIGHT is not
connected.
sonoroLIGHT is connected
but the dimmer function is
switched
The lamp connected to
sonoro- LIGHT is switched
off.
Elimination
Reduce the distance between the
remote control and the device.
Replace the battery in the remote
control (Please see chapter 6.5
'Preparing the remote control' on
page 63).
Increase the distance between the
source of interference and the radio.
Plug the device into another socket
so that the source of interference and
the radio are connected to different
branch currents.
Switch on the alarm (Please see
chapter 8.6 'Switching the alarm clock
on/off' on page 75).
Increase the volume (Please see
chapter 8.3 'Setting the alarm
volume' on page 73).
Pull the headphones out of the jack.
Connect sonoroLIGHT and set the
alarm light (Please see chapter 8.5
'Pro- gramming the alarm light
(sunrise)' on page 74).
Switch on the dimmer function on
sonoroLIGHT.
Switch the connected lamp on.
GB
93
Advertenties
Hoofdstukken
Inhoudsopgave
