Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Now the time zone will blink (00) and can be set using
17 or
/ RCC OFF 18. Confirm your setting by pressing SET / °C / °F 14.
Now perform a restart. The clock will continue to receive the DCF-77 radio
control signal but will show the changed time (for example, 1 hour less).
Restart
Radio reception can be manually restarted by pressing RCC / RESET 16 on the
backside of the clock for 4 seconds. The radio tower
display. This process can take from 3 to 10 minutes.
If radio reception fails, the time must be set manually (see basic settings).
Activating/ deactivating radio signal reception
Radio signal reception can be deactivated manually by pressing
/ RCC OFF 18 on the backside of the clock for 4 seconds. The
radio tower
5 will disappear from the display. Press for 2
seconds
/ RCC OFF 18 again. The radio waves
display. The clock will now no longer receive the radio signal. Set the time
manually as described in basic settings.
Radio signal reception can be restarted by pressing RCC / RESET 16 on the
backside of the clock for 4 seconds. The radio tower
display. This process can take from 3 to 10 minutes.
If radio reception fails, the time must be set manually (see basic settings).
Reception problems
The DCF77 radio signal is transmitted from a location near Frankfurt am Main
and can be received within a radius of approximately 1500 km around
Frankfurt am Main. However, there are some obstacles and sources of
interference, which may substantially hinder reception. If your alarm clock does
not correctly receive the DCF77 radio signal, please hang or place the alarm
clock a different location at your site. Please note that devices such as
computers, telephones, radios and televisions may cause electromagnetic
radiation which can interfere with the DCF77 signal reception. Other possible
detriments to reception are: strong building insulation (metal building materials),
nearby mountains or atmospheric interference. It may also be necessary to
replace the batteries.
Light
Press SNOOZE / LIGHT 2 on the top of the clock to briefly activate
the light.
Temperature display
Press SET / °C / °F 14 to select the temperature unit Celsius (°C)
or Fahrenheit (°F).
Speed setting
When setting numerical settings, press and hold the relevant button to use the
speed setting feature.
ALARM ON / OFF
5 will blink on the
will disappear from the
5 will blink on the
- 5 -
Advertenties
Hoofdstukken
Inhoudsopgave
