Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3000127 RSVG DK DE NO SE UK NL FR 20220510
Step
3
Adjust the distance between the location brackets to t
the inside diameter of the chimney, and then tighten
the nuts. Note that there should be a 2-4 mm gap
between the brackets and the chimney so as to avoid
transmitting vibrations from the fan to the chimney
A and B measurements: please refer to step 1.
Before tting onto a steel chimney
Step
1
A ange (D), supplied as extra, is used, tted so that the
spigot end sits inside the chimney (E).
2
Place the mineral wool mat (B) on the ange (D) and
cut a hole in the mineral wool mat (the hole being the
same diameter as the ange hole).
3
Cut the corners of the mineral wool mat, so there is
room to t the vibration dampers (C).
4
Fit the ange to the chimney fan, with the use of the
vibration dampers.
5
The fan can now be tted onto the chimney..
Action
Action
A
B
C
D
E
UK •
5
Advertenties
Inhoudsopgave
