Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.6.4 Fitting instructions
!
The product should be filled with water before the power is switched on.
Fixed electric fittings should be used for installation in new homes or when changing an existing
!
electrical setup in accordance with regulations. A mains cable with plug for wall socket can be
used when replacing the product without changing the electrical setup.
!
The mains cable should withstand 90°C. A strain reliever must be fitted.
The product must have a clearance for servicing of 40 cm in front of the cover / 10 cm
!
over the mixer valve.
In case of damage to the mains cable and plug, it should be replaced with a specially adapted
!
mains cable from the manufacturer.
3.6.5 Fitting recommendation
The mains cable supplied should be used with fixed electric fittings by removing the plug for the
-
wall socket. (Heat-resistant)
Mains cable for wall socket/wall box should be hidden under one of the channels in the bottom of
-
the product.
For products with ≤ 2kW capacity, a > 10A fuse / > 1.5# wire should be used*.
-
For products with ≤ 3kW capacity, a > 15A fuse / > 2.5# wire should be used (230V).
WARNING
!
!
CAUTION
RECOMMENDATION
11
Advertenties
Hoofdstukken
Inhoudsopgave
