Advertenties
Beschikbare talen
Beschikbare talen
Problem
The front display becomes dim.
The clock setting has been cleared.
There is noise interference from digital or
high-frequency equipment.
The remote control does not work or does
not function properly.
Network
Problem
The network feature does not function.
Playback stops (songs cannot be played
back continuously).
The unit does not detect the PC.
Cause
The front display setting is set to AUTO.
The power cable of the unit was unplugged from the outlet. Or an outage
occurred.
This unit is too close to the digital or high-frequency equipment.
The remote control may be operated outside its operation range.
The remote control sensor on this unit may be exposed to direct sunlight or
strong lighting such as an inverter type fluorescent lamp.
The battery in the remote control may be worn out.
There are obstacles between the sensor of this unit and the remote control.
Cause
The network parameters (IP address) have not been obtained properly.
There are unsupported files in the server.
The media sharing setting of the PC is not correct.
Some security software installed on your PC is blocking the access of the unit
to your PC.
The unit and PC are not in the same network.
Solution
Set the brightness of the front panel display to a setting other than AUTO. Or,
do not cover the illumination sensor.
Connect the power cable, and set the clock again (
Place this unit farther away from such equipment.
Operate the remote control within its operation range (
Change the orientation of lighting or the unit, or location of the unit.
Replace the batteries with new ones (
P.8).
Remove the obstacles.
Solution
Enable the DHCP server function of the router. For details on how to set the
router, contact the manufacturer of the router.
Remove the files (including image files or hidden files) which the unit does
not support, from the folder being played back.
Configure the sharing setting of the PC and select the unit as a device to
which music contents are shared (
P.19).
Check the setting of the security software installed in your PC.
Check the network connections and your router settings, and then connect
the unit and the PC to the same network.
Troubleshooting
P.17).
P.8).
39
En
Advertenties
