Advertenties
Beschikbare talen
Beschikbare talen
Updating the firmware
When new firmware is detected from the network, "UP" will be shown on the front panel display (press any button to turn off the "UP" indication on the front panel display).
There are two ways to updating the firmware.
Updating with a mobile device
You can use "MusicCast CONTROLLER" to update the
firmware. Follow the indication of "MusicCast
CONTROLLER" to update the firmware.
Updating with the unit
1
A
Press
to turn the unit off.
2
Pull out the plug from the wall outlet.
3
While pressing PRESET, plug the
power cable into the wall outlet.
• PRESET and the "UP" indications flash on the unit.
4
Press PRESET.
• The firmware starts being updated, and when the
update is completed, the "100 UP" indication flashes.
5
A
Press
to check that the normal
display is returned.
36
En
• Do not operate the unit or disconnect the power
cable while updating.
• When Internet speed is not fast enough or the unit
is connected to the wireless network via a wireless
network adapter, network update may not be
possible depending on the condition of the
wireless connection. If the firmware update fails,
the "Er" indication flashes. In that case, try
updating again after a while.
Advertenties
