Advertenties
Beschikbare talen
Beschikbare talen
3.
Continue testing at increased energy levels. Use the energy
levels indicated on the skin colour chart. When you find the
highest energy level that is comfortable for that treatment
area, you can start your treatment.
EN
Use a lower energy level if you experience discomfort.
Z
You are now ready to peform a treatment.
6.4 Treatment steps
Press the control button (#4). The device will turn on, the
1.
level 1 energy indicator light (#1) will be on, and a fan
sound will start.
After pressing the control button (#4), the ready light (#3)
2.
will turn on. The device is then ready to use at the lowest
energy level. Always start at energy level 1 for your first
treatment.
Set the energy level. Press the control button
3.
(#4) repeatedly to increase the energy level until you
have the level you want. The energy level indicator
lights (#1) indicate the energy level setting (see section
4.6 Energy levels). The number of energy level indicator
lights (#1) that are on, indicates the energy level selected.
Decide if you wish to treat the area by Pulsing or Gliding
4.
(refer to section 4.8 Pulsing and gliding).
Apply the treatment surface (#6) to the skin. Make sure
5.
that the skin is spread evenly and smoothly. When the
treatment surface (#6) is in full contact with the skin, the
ready light (#3) will start blinking slowly.
6.
The device will first determine the colour of your skin
automatically and it will flash a pulse of light onto your skin.
You will feel a mild sensation of warmth and tingling, and
you may hear a popping sound.
18
Advertenties
