Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGL ISH
Thank you for choosing our ceiling fan. Before using this appliance and to ensure its best
use, please read the instructions carefully.
The safety measures listed here reduce the risk of fire, electric shock, and injury when
followed correctly. Please keep the manual in a safe place for future reference, as well as
the sales receipt and box. If applicable, give these instructions to the future owner of the
appliance.
Always follow basic safety instructions and hazard prevention measures when using an
electrical appliance. The manufacturer will not be responsible for any damage resulting
from the user's failure to follow these instructions.
LOCATION AND INSTALLATION REQUIREMENTS
M EC HAN IC TIP S
• According to safety regulations, the lowest point of the fan blade must be at least 2.3m (7
feet) from the floor.
• Please make sure the chosen location will not allow the rotating fan blades to come into
contact with any objects.
• Ensure ceiling joists are sound and are large and strong enough to support the weight of
the fan.
• To reduce the risk of fire, electric shock or personal injury, ensure that the fan mounting
bracket is attached directly to the building structure. Do not mount to an outlet box.
• The mounting bracket must be firmly screwed to a load bearing structure, e.g. a concrete
ceiling, steel structure or timber frame. If a timber frame is added, it must be securely
nailed or screwed between two beams.
• To reduce risk of personal injury and property damage, do not bend or damage the downrod
or the fan blades when handling or installing them. If you notice any product imperfections,
please contact our after-sales service before proceeding to install the fan.
• Make sure the ceiling fan is securely fastened to the ceiling. All set screws must be
checked and re-tightened where necessary before fan operation.
E LECTR ICAL TIP S
• Turn off the power before performing any work on the ceiling fan and turn off the power
breaker. To avoid possible electrical shock, check that the power is turned off at the fuse
box or circuit breaker panel before wiring.
• The fan, mounting bracket and lighting equipment must be connected to a ground. Check
that all splices are well insulated.
• Check and confirm that all connections are correct and secure. Once all electrical connec-
tions have been made, store all cables securely.
• Do not attempt to control this fan from a wall switch or remote control that is not approved
by the manufacturer for use with the fan. Do not use a solid state controller. Use of a
non-approved wall switch or remote control will void your warranty.
• Do not connect the ceiling fan to a dimmer switch.
E NGL I SH
6
Advertenties
Inhoudsopgave
