Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
Fault
The robot lawn mo-
wer comes to a halt
on the perimeter
wire and is unable
to get back to the
charging station.
IMPORTANT! Severed perimeter wires and consequential damages are not covered by the war-
ranty!
Anl_FREELEXO_LCD_BT_SPK13.indb 48
Anl_FREELEXO_LCD_BT_SPK13.indb 48
GB
Possible cause
- The battery is empty
- The length of the perimeter
wire (18) and therefore the
distance to the charging sta-
tion (19) is too great for the
battery being used.
- 48 -
Remedy
- Remove all possible obstacles from the
perimeter wire (18). When you layout out
the perimeter wire (18), be sure to keep it
far enough away from any obstacles.
- Please use a battery with higher capacity.
- Important: When using a Multi-Ah battery
(e.g. 4-6 Ah), set the higher capacity.
Thanks to the gentle charging and di-
scharging of the robot lawn mower there is
no need to use the lower capacity in order
to extend the working life.
09.11.2021 14:54:52
09.11.2021 14:54:52
Advertenties
